[Lead2pass New] Lead2pass Exam Collection 200-355 Dumps And 200-355 New Questions (381-400)

2017 October Cisco Official New Released 200-355 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Our PDF dumps of 200-355 exam is designed to ensure everything which you need to pass your exam successfully. At Lead2pass, we have a completely customer oriented policy. We invite the professionals who have rich experience and expert knowledge of the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/200-355.html

QUESTION 381
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beamwidth measured? (Choose two.)

A.    3 dB
B.    6 dB
C.    9 dB
D.    10 dB
E.    1/2 power
F.    1/4 power
G.    1/8 power
H.    1/10 power

Answer: AE

QUESTION 382
Refer to the exhibit. A network engineer needs the far end of a wireless bridge to receive at -45dBM.

 

Based on the diagram, what value in dBm must the transmitter use to send to achieve the desired result?

A.    -118
B.    -28
C.    -20
D.    20
E.    28
F.    118

Answer: E

QUESTION 383
When calculating the link budget for a wireless point-to-point bridge, the engineer notices that one antenna has its gain marked as 2.85 dBd. With a 20-mW access point and 3-dBi loss for the cable, what is the approximate EIRP?

A.    15 dBm
B.    18 dBm
C.    22 dBm
D.    25 dBm

Answer: A

QUESTION 384
Due to the terrain, a deployment requires a point-to-point wireless bridge to allow for network connectivity to a remote building. What 5GHz band would permitted to use the highest power in the U.S.?

A.    U-NII-3
B.    U-NII-2 Extended
C.    U-NII-2
D.    U-NII-1

Answer: A

QUESTION 385
A wireless engineer is designing a network for the London branch of a company. Which 5-GHz band allows the branch to use the highest EIRP?

A.    2.4-GHz ISM
B.    UNII-1
C.    UNII-2
D.    UNII-2 Extended

Answer: D

QUESTION 386
When using OFDM, how many subcarriers are devoted to carrying data?

A.    4
B.    12
C.    44
D.    48
E.    52

Answer: D

QUESTION 387
A company has all IEEE 802.11a/802.11g devices; however, its network administrator recommends installing 802.11n access points to provide greater performance. Which feature on an 802.11n AP provides better performance to legacy devices?

A.    channel aggregation
B.    transmit beam-forming
C.    maximal-ratio combining
D.    spatial multiplexing

Answer: B

QUESTION 388
When roaming between APs in an ESS, which value changes?

A.    BSSID
B.    SSID
C.    VLAN
D.    IP range

Answer: A

QUESTION 389
A customer is concerned about ease of wireless management.
Which deployment model requires the highest administrative overhead to deploy and manage?

A.    autonomous
B.    local mode
C.    cloud
D.    converged

Answer: A

QUESTION 390
Which architecture is used to divide the roles between the access point and the WLC when deploying a centralized wireless solution?

A.    Split MAC
B.    CAPWAP
C.    LWAPP
D.    Local MAC

Answer: A

QUESTION 391
An autonomous AP maps the SSID to what on the wired network?

A.    BSSID
B.    VLAN
C.    QoS tag
D.    SG tag

Answer: B

QUESTION 392
A customer is expecting wireless traffic in excess of 20 Gbps to traverse a single controller. Which wireless controller model fulfills this requirement?

A.    Cisco 5760 Wireless Controller
B.    Cisco Wireless Services Module 2
C.    Cisco 2504 Wireless Controller
D.    Cisco 8510 Wireless Controller
E.    Cisco 5500 Wireless Controller
F.    Cisco Virtual Wireless Controller

Answer: A

QUESTION 393
An engineer is connecting a Cisco 5508 Wireless Controller that must connect to an out-of-band management network for management only. Which two options should be used for the port on the WLC and the cable type? (Choose two.)

A.    service port
B.    redundancy port
C.    console port
D.    distribution system port
E.    straight through cable
F.    crossover cable
G.    console cable

Answer: AE

QUESTION 394
A user is unable to access a lobby administration web page when using a wireless laptop; however, the user can access the page with a wired desktop computer. Which management feature needs to be enabled on the WLC to allow laptop access?

A.    management via wireless
B.    dynamic interface management
C.    HTTP
D.    HTTPS
E.    TACACS
F.    SSH

Answer: A

QUESTION 395
In version 8.0 code for CUWN, what interface can be assigned an IPv6 address?

A.    management
B.    dynamic
C.    AP-manager
D.    virtual
E.    service-port

Answer: A

QUESTION 396
A network engineer is configuring a WLC running Cisco AireOS 8.0.100.0 for a company that uses IPv6. Which two interfaces can be configured with an IPv6 address? (Choose two.)

A.    management
B.    dynamic
C.    AP manager
D.    redundancy
E.    service

Answer: AE

QUESTION 397
Refer to the exhibit. An engineer is testing client connectivity and is unable to transmit or receive at IEEE 802.11n high throughput rates. Which two Layer 2 security configurations allow the client to successfully connect at 802.11n rates? (Choose two.)

 

A.    WPA2-AES 802.1x
B.    WPA2-TKIP PSK
C.    WPA-TKIP 802.1x
D.    Open
E.    802.1x

Answer: AD

QUESTION 398
An engineer is deploying an autonomous AP, and the customer requests that all IEEE 802.11b data rates be disabled on the AP. Which interface must be amended to disable the 802.11b data rates on a Cisco Aironet 1252 Series Access Point?

A.    Dot11radio0
B.    Dot11radio1
C.    GigabitEthernet0
D.    BVI1

Answer: A

QUESTION 399
After the initial deployment at a customer site, the master controller mode function was left enabled on the secondary controller after access points were primed and statically configured with primary, secondary, and tertiary controller failover. The guest anchor controller was also deployed in the architecture. The access points reboot after a power failure. Which controller will the access points associate to when the reboot process is completed?

A.    primary controller
B.    secondary controller
C.    tertiary controller
D.    guest anchor controller

Answer: B

QUESTION 400
A remote site has requested that its wireless client traffic egress at the switch port of the access point. Which access point mode can be used?

A.    FlexConnect
B.    local
C.    monitor
D.    rogue detector
E.    SE-Connect

Answer: A

If you want to get more 200-355 exam preparation material, you can download the free 200-355 braindumps in PDF files on Lead2pass. It would be great helpful for your exam. All the 200-355 dumps are updated and cover every aspect of the examination. Welcome to choose.

200-355 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDd3NzLWRUUTRLME0

2017 Cisco 200-355 exam dumps (All 500 Q&As) from Lead2pass:

https://www.lead2pass.com/200-355.html [100% Exam Pass Guaranteed]