The Microsoft 70-410 PDF, 70-410 practice test and 70-410 questions and answers at GreatExam are written and prepared by Microsoft affiliated trainers and lecturers with decades of experience in the IT field. This ensures that you are equipped with the latest and most current information to give you a better chance of passing the Microsoft 70-410 exam.
QUESTION 391
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
You need to switch Server1 to a Server Core installation of Windows Server 2012 R2.
What command should you run?
To answer, select the appropriate options in the answer area.
Answer:
QUESTION 392
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?
A. Service 1
B. Test-DscConfiguration
C. Start-DscConfiguration
D. Configuration1
Answer: D
QUESTION 393
Drag and Drop Question
You are configuring a multi-subnet IPv6 network for a regional office.
The corporate network administrator allocates the 2001:0db8:1234:0800: :/54 address space for your use.
You need to identify network IDs of the first and last subnets that you will be able to create at the office.
Which network IDs should you identify? To answer, drag the appropriate network IDs to the correct subnets. Each network ID may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 394
Your network contains an Active Directory domain named contoso.com.
The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
What should you do first?
A. From the DHCP console, reconcile Scope1.
B. From the DHCP console, delete Scope1.
C. From the DHCP console, modify the Scope Options of Scope1.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
Answer: B
Explanation:
After you create a scope in DHCP, the subnet option is greyed out, you can not change it.
You can change the starting and ending ip addresses, but not the subnet mask.
So, the only option you have left is to delete it and create a new one with the right subnet.
There you can see the subnet option on the DHCP scope:
https://www.youtube.com/watch?v=atdWcJIuCTw
QUESTION 395
Hotspot Question
You have a print server named Server1 that runs Windows Server 2012 R2.
On Server1, you create and share a printer named Printer1.
The Advanced settings of Printer1 are shown in the Advanced exhibit. (Click the Exhibit button.)
The Security settings of Printer1 are shown in the Security exhibit. (Click the Exhibit button.)
The Members settings of a group named Group1 are shown in the Group1 exhibit. (Click the Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
Answer:
QUESTION 396
Hotspot Question
A printer named Printer1 is configured as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
Answer:
QUESTION 397
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2.
You need to add a user named User1 to a group named ServerAdmins.
What command should you run?
To answer, select the appropriate options in the answer area.
Answer:
QUESTION 398
Hotspot Question
You have a DHCP server named Server1 that runs Windows Server 2012 R2.
On Server1, you run the commands as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
Answer:
QUESTION 399
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2012 R2.
You need to perform the following storage configuration tasks on Server1:
– Bring a disk named Diskl online.
– Defragment a volume named Volumel.
– Remove a disk named Disk2 from a storage pool named Pooll.
Which cmdlet should you use to perform each task? To answer, drag the appropriate cmdlets to the correct tasks. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 400
Your network contains an Active Directory domain named contoso.com.
You have a DHCP server named Server1 that runs Windows Server 2008.
You install Windows Server 2012 R2 on a server named Server2.
You install the DHCP Server server role on Server2.
You need to migrate the DHCP services from Server1 to Server2.
The solution must meet the following requirements:
– Ensure that existing leases are migrated.
– Prevent lease conflicts.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Server1, run the Export-DhcpServer cmdlet.
B. On Server1, run the Stop-Service cmdlet.
C. On Server2, run the Receive-SmigServerData cmdlet.
D. On Server2, run the Stop-Service cmdlet.
E. On Server2, run the Import-DhcpServer cmdlet.
F. On Server1, run the Send-SmigServerData cmdlet.
Answer: ABE
QUESTION 401
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2.
You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11.
The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A. From Server Manager, change the load balancing mode of Team1.
B. Run the New-NetLbfoTeam cmdlet.
C. From Server Manager, add an interface to Team1.
D. Run the Add-NetLbfoTeamMember cmdlet.
Answer: C
QUESTION 402
You have a server named Server1 that runs Windows Server 2012 R2.
You need to create a script that will create and mount a virtual hard disk.
Which tool should you use?
A. vdsldr.exe
B. diskpart.exe
C. fsutil.exe
D. vds.exe
Answer: B
QUESTION 403
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
All server are configured to enforce AppLocker policies.
You install a server named Server1.
On Server1, you install an application named appl.exe in a folder located on C:\App1.
You have two domain groups named Group1 and Group2.
A user named User1 is a member of Group1 and Group2.
You create a Group Policy object (GPO) named GPO1.
You link GPO1 to contoso.com.
You create the executable rules as shown in the exhibit by using the Create Executable Rules wizard. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
Answer:
QUESTION 404
You have virtual machine named VM1.
VM1 uses a fixed size virtual hard disk (VHD) named diskl.vhd. Diskl.vhd is 200 GB.
You shut down VM1.
You need to reduce the size of diskl.vhd.
Which action should you select from the Edit Virtual Hard Disk Wizard?
A. Merge
B. Compact
C. Shrink
D. Convert
Answer: D
Explanation:
The Edit Virtual Hard Disk Wizard allows you to Compact, Convert, or Expand the VHD. Compacting reduces the size of a dynamically expanding VHD but not a fixed-size VHD. Converting changes the disk format to the newer VHDX. This process recreates the virtual disk, and allows you to specify the size of the VHDX.
http://blogs.technet.com/b/yungchou/archive/2013/01/23/hyper-v-virtual-hard-disk-vhd-operations-explained.aspx
http://blogs.technet.com/b/aviraj/archive/2012/05/06/windows-server-2012-convert-vhd-to-vhdx-using-hyper-v-manager.aspx
QUESTION 405
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The NUMA Spanning settings
B. The RemoteFX settings
C. The Enhanced Session Mode Policy
D. The Integration Services settings
Answer: C
QUESTION 406
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation:
For other questions to create a VHD (file) you can use computer management.
– Share and storage management (2008 only)
– New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
– Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION 407
Hotspot Question
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts 40 virtual machines that run Windows Server 2008 R2.
The virtual machines connect to a private virtual switch.
You have a file that you want to copy to all of the virtual machines.
You need to identify to which servers you can copy files by using the Copy-VmFile cmdlet.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 408
Hotspot Question
Your network contains an Active Directory forest.
The forest contains a single domain named contoso.com.
AppLocker policies are enforced on all member servers.
You view the AppLocker policy applied to the member servers as shown in the exhibit.
(Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
Answer:
Explanation:
Windows Mail is not present on windows servers, so “No one can run Windows Mail on the servers.”
At the exam Windows Mail was changed with Wordpad. So “Everyone can run Wordpad on the servers”.
QUESTION 409
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1.
The scopes are configured as shown in the following table.
The DHCP clients in Subnet_Tor can connect to the client computers in Subnet_Mtl by using an IP address or a FQDN.
You discover that the DHCP clients in Subnet_Mtl can connect to client computers in Subnet_Tor by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
A. The 015 DNS Domain Name option to Subnet_Mtl
B. The 015 DNS Domain Name option to Subnet_Tor
C. The 006 DNS Servers option to Subnet_Mtl
D. The 006 DNS Servers option to Subnet_Tor
Answer: C
QUESTION 410
You have a server named Server1 that runs Windows Server 2012 R2.
You add an additional disk to Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users can access the additional disk from drive C.
What should you do?
A. Convert Disk 0 and Disk 1 to dynamic disks and extend a volume.
B. Convert Disk 1 to a dynamic disk and create a spanned volume.
C. Create a simple volume on Disk 1 and mount the volume to a folder.
D. Convert Disk 0 to a dynamic disk and add a mirror.
Answer: C
GreatExam guarantees your 70-410 exam success with our exam resources. Our 70-410 braindumps are the latest and developed by experienced IT certification professionals working in today’s prospering companies and data centers. All our 70-410 braindumps include 70-410 real exam questions which guarantee your 100% success of 70-410 exam in your first try.