2017 March Microsoft Official New Released 70-743 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
70-743 dumps free share: Lead2pass presents the highest quality of 70-743 exam dump which helps candidates to pass the 70-743 exams in the first attempt.
Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-743.html
QUESTION 11
Drag and Drop Question
You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host.
On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines.
How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 12
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.
You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic
Answer:
QUESTION 13
Hotspot Question
Your company has a testing environment that contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2016.
Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.
The group policy configurations are shown in the GPO exhibit.
For each of the following statements, select Yes if the statement is true Otherwise, select No
Answer:
QUESTION 14
You need to modify the GPO prefix by IPAM. What should you do?
A. Run the Set-lpam Configuration cmdlet
B. Click Provision the IPAM server in Server Manager.
C. Click Configure server discovery in Server Manager.
D. Run the lnvoke-lpam Gpo Provisioning cmdlet
Answer: A
QUESTION 15
You need to ensure that VM1 and VM2 can communicate with each other only.
The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?
A. Set-NetNeighbor
B. Remove-VMSwitchTeamMember
C. Set-VMSwitch
D. Enable-VMSwitchExtension
Answer: C
QUESTION 16
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named Server1 and a member server named Server2. Server1 has the DNS Server role installed Server2 has IP Address Management lPAM installed. The IPAM server retrieves zones from Server1 as shown in the following table
The IPAM server has one access policy configured as shown in the exhibit.
For each of following statements, select YES, if the statement is true. Otherwise, select NO.
Answer:
QUESTION 17
Hotspot Question
You have a Hyper-V host that runs Windows Server 2016.
The Hyper-V host has a virtual machine named VM1.
You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2016.
You plan to create multiple virtual machines that will use the generalized image.
You need to create differencing disks based on VHD1 vhdx.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 18
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1.
You select the automatic provisioning method, and then you specify a prefix of IPAM.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 19
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed.
Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers Each object type may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content
Answer:
Explanation:
Server 1 (IPAM): Access Policy
VMM must be granted permission to view and modify IP address space in IPAM, and to perform remote management of the IPAM server. VMM uses a “Run As” account to provide these permissions to the IPAM network service plugin. The “Run As” account must be configured with appropriate permission on the IPAM server.
To assign permissions to the VMM user account
1. In the IPAM server console, in the upper navigation pane, click ACCESS CONTROL, right-click Access Policies in the lower navigation pane, and then click Add Access Policy.
Etc.
Server 2 (VMM) #1: Network Service
Server 2 (VMM) #2: Run As Account
Perform the following procedure using the System Center VMM console.
To configure VMM (see step 1-3, step 6-7)
In the Fabric workspace, expand the Networking node and then click Network Service.
Right-click Network Service, and click Add Network Service.
In the Add Network Service Wizard, on the Name page, next to Name, type IPAM and then click Next. The Description field is optional.
On the Manufacturer and Model page, next to Manufacturer, choose Microsoft and next to Model, choose Microsoft Windows Server IP Address Management, and then click Next.
On the Credentials page, next to Run As account, click Browse and then click Create Run As Account.
On the Create Run As Account page, next to Name type a name for the account, for example VMM User.
Next to User name, Password and Confirm password, enter the username and password for the account that was created on the IPAM server in the previous procedure, for example contoso\vmmuser. A description is optional. See the following example. Click OK to continue.
Etc.
References: https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx
QUESTION 20
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains four servers named Server1, Server2, Server3 and Server4 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed Server2, Server3, and Server4 have the DHCP Server rote instated IPAM manages Server2, Server3 and Server4. A domain user named User1 is a member of the groups shown in the following table
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Lead2pass is now offering Lead2pass 70-743 PDF dumps with 100% passing guarantee. Use Lead2pass 70-743 PDF and pass your exam easily. Download Microsoft 70-743 exam dumps and prepare for exam.
Microsoft 70-743 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDWGpUeXZ3ZE9ZX3c
2017 Microsoft 70-743 exam dumps (All 97 Q&As) from Lead2pass:
http://www.lead2pass.com/70-743.html [100% Exam Pass Guaranteed]
2017 March Microsoft Official New Released 70-743 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
70-743 dumps free share: Lead2pass presents the highest quality of 70-743 exam dump which helps candidates to pass the 70-743 exams in the first attempt.
Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-743.html
QUESTION 11
Drag and Drop Question
You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host.
On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines.
How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 12
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.
You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic
Answer:
QUESTION 13
Hotspot Question
Your company has a testing environment that contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2016.
Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.
The group policy configurations are shown in the GPO exhibit.
For each of the following statements, select Yes if the statement is true Otherwise, select No
Answer:
QUESTION 14
You need to modify the GPO prefix by IPAM. What should you do?
A. Run the Set-lpam Configuration cmdlet
B. Click Provision the IPAM server in Server Manager.
C. Click Configure server discovery in Server Manager.
D. Run the lnvoke-lpam Gpo Provisioning cmdlet
Answer: A
QUESTION 15
You need to ensure that VM1 and VM2 can communicate with each other only.
The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?
A. Set-NetNeighbor
B. Remove-VMSwitchTeamMember
C. Set-VMSwitch
D. Enable-VMSwitchExtension
Answer: C
QUESTION 16
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named Server1 and a member server named Server2. Server1 has the DNS Server role installed Server2 has IP Address Management lPAM installed. The IPAM server retrieves zones from Server1 as shown in the following table
The IPAM server has one access policy configured as shown in the exhibit.
For each of following statements, select YES, if the statement is true. Otherwise, select NO.
Answer:
QUESTION 17
Hotspot Question
You have a Hyper-V host that runs Windows Server 2016.
The Hyper-V host has a virtual machine named VM1.
You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2016.
You plan to create multiple virtual machines that will use the generalized image.
You need to create differencing disks based on VHD1 vhdx.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 18
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1.
You select the automatic provisioning method, and then you specify a prefix of IPAM.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 19
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed.
Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers Each object type may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content
Answer:
Explanation:
Server 1 (IPAM): Access Policy
VMM must be granted permission to view and modify IP address space in IPAM, and to perform remote management of the IPAM server. VMM uses a “Run As” account to provide these permissions to the IPAM network service plugin. The “Run As” account must be configured with appropriate permission on the IPAM server.
To assign permissions to the VMM user account
1. In the IPAM server console, in the upper navigation pane, click ACCESS CONTROL, right-click Access Policies in the lower navigation pane, and then click Add Access Policy.
Etc.
Server 2 (VMM) #1: Network Service
Server 2 (VMM) #2: Run As Account
Perform the following procedure using the System Center VMM console.
To configure VMM (see step 1-3, step 6-7)
In the Fabric workspace, expand the Networking node and then click Network Service.
Right-click Network Service, and click Add Network Service.
In the Add Network Service Wizard, on the Name page, next to Name, type IPAM and then click Next. The Description field is optional.
On the Manufacturer and Model page, next to Manufacturer, choose Microsoft and next to Model, choose Microsoft Windows Server IP Address Management, and then click Next.
On the Credentials page, next to Run As account, click Browse and then click Create Run As Account.
On the Create Run As Account page, next to Name type a name for the account, for example VMM User.
Next to User name, Password and Confirm password, enter the username and password for the account that was created on the IPAM server in the previous procedure, for example contoso\vmmuser. A description is optional. See the following example. Click OK to continue.
Etc.
References: https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx
QUESTION 20
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains four servers named Server1, Server2, Server3 and Server4 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed Server2, Server3, and Server4 have the DHCP Server rote instated IPAM manages Server2, Server3 and Server4. A domain user named User1 is a member of the groups shown in the following table
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Lead2pass is now offering Lead2pass 70-743 PDF dumps with 100% passing guarantee. Use Lead2pass 70-743 PDF and pass your exam easily. Download Microsoft 70-743 exam dumps and prepare for exam.
Microsoft 70-743 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDWGpUeXZ3ZE9ZX3c
2017 Microsoft 70-743 exam dumps (All 97 Q&As) from Lead2pass:
http://www.lead2pass.com/70-743.html [100% Exam Pass Guaranteed]