2017 April Microsoft Official New Released 70-740 Q&As in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
Lead2pass is ready to provide Microsoft candidates with 70-740 exam dumps which can be very helpful for getting Microsoft certification, which means that candidates can easily get access to the services of Microsoft 70-740 exam dumps, which will assure them 100% passing success rate. With Lead2pass 70-740 exam dumps, it will be easy to pass your 70-740 exam at your first time.
Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html
QUESTION 16
You have a server named Server1 that runs Windows Server 2016.
You install the Docker daemon on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?
A. Run theNew-NetFirewallRulecmdlet
B. Run theSet-ServiceWindows PowerShell cmdlet.
C. Edit the daemon.json file.
D. Edit the configuration json file
Answer: C
QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses.
You configure the cluster to use unicast.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 18
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 contains four virtual machines that are configured as shown in the following table.
To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?
A. VM1, VM2, VM3 and VM4
B. VM4 only
C. VM1 and VM2 only
D. VM3 and VM4 only
E. VM2 only
Answer: D
Explanation:
Virtual Machine Connection cannot be used to connected to Shielded Virtual Machines.
QUESTION 19
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster.
You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: F
QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host1 and Host2.
Does this meet the goat?
A. Yes
B. No
Answer: B
QUESTION 21
You have an Active Directory domain named Contoso.com.
The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1.
You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?
A. From Routing and Remote Access, configure the authentication provider.
B. From the Connection Manager Administration Kit, create a Connection Manager profile
C. From Server Manager, create an Access Policy.
D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
Answer: A
QUESTION 22
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2.
All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
– Each virtual machine has one virtual network adapter
– VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
– All of the servers on the network can communicate with all of the virtual machines.
End of repeated Scenario.
On server4, you plan to provision a new volume that will be used to create large, fixed-size VHDX files.
Which type of file system should you use the new volume to minimize the amount of time required to create the VHDX files?
A. ReFS
B. NTFS
C. CVFS
D. exFAT
Answer: A
Explanation:
ReFS has the fastest creation times for large, fixed-size VHDx files.
QUESTION 23
You have a server named Server1 that runs Windows Server 2016.
The Windows Server 2016 installation media is mounted as drive D.
You copy the NanoServerimageGenerator folder from the D:\NanoServer folder to the C \NanoServer folder.
You need to create a custom Nano Server image that mdudes the Hyper-V server role.
The image will be used to deploy Nano Servers to physical servers.
Which two commands should you run?
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: DE
Explanation:
You must import the module for NanoServerImage generation, then use the New-NanoServerImage command to create the new image.
QUESTION 24
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?
A. Enable-ClusterStorageSpacesDired
B. Set-StoragePool
C. Add-ClusterDisk
D. Update-ClusterVirtualMachineConfiguration
Answer: A
QUESTION 25
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2.
All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
– Each virtual machine has one virtual network adapter.
– VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
– All of the servers on the network can communicate with all of the virtual machines.
End of repeated Scenario.
You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
What should you do?
A. Configure the virtual machines as shielded virtual machines.
B. Run the Set-VMProcessor cmdlet and specify the -EnableHostResourceProtection Parameter.
C. Run the Set-VMProcessor cmdlet and specify the -MaximumCountPerNumaNode Parameter.
D. Configure VM Network Adapter Isolation.
Answer: B
Explanation:
Enable Set-VMProcessor with EnableHostResourceProtection to prevent an a virtual machine from consuming excessive resources on its host.
QUESTION 26
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest.
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO)
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION 27
You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
QUESTION 28
In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com.
The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution From Windows PowerShell on Server1, you run the Export- DnsServerDnsSecPublicKey cmdlet.
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION 29
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a two-node Hyper-V cluster named Cluster1.
As virtual machine named VM1 runs on Cluster1.
You need to configure monitoring of VM1.
The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.
Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Answer: F
QUESTION 30
You have a failover cluster named Cluster!
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.
You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.
Which tool should you use?
A. Hyper-V Manager
B. Failover Cluster Manager
C. Server Manager
D. Resource Monitor
Answer: B
Lead2pass are committed on providing you with the latest and most accurate 70-740 exam dumps. Our 70-740 dump is rich in variety. We offer 70-740 PDF dumps and 70-740 VCE dumps. We ensure you can pass the 70-740 easily. Welcome to Lead2pass.com.
70-740 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDTzFiNkZZMGowWWs
2017 Microsoft 70-740 exam dumps (All 113 Q&As) from Lead2pass:
http://www.lead2pass.com/70-740.html [100% Exam Pass Guaranteed!!!]