If you are not prepared for Microsoft 70-341 exam, please don’t worry. You can pass Microsoft 70-341 exam very simply and easily with our free 70-341 dumps. With our braindumps you shall get GreatExam 70-341 PDF & VCE. After preparing from our free Microsoft 70-341 GreatExam practice test you shall not only pass this exam as well you will get good marks in very short time.
QUESTION 176
Your network contain an Active Directory forest.
The forest contains a single domain named contoso.com.
The network contains a legacy mail system that uses a SMTP namespace of contoso.com.
You plan to deploy Exchange Server 2013.
There will be a period of interoperability while the email is migrated from the legacy system to Exchange Server 2013.
During the period of interoperability, you need to ensure that all incoming email is received by an Exchange Server 2013 server, and then routed to the legacy mail system if an Exchange Server email recipient cannot be found.
You configure the firewall in the perimeter network to route SMTP traffic to the Exchange Server 2013 organization.
What should you do next?
A. Modify the existing accepted domain for contoso.com and create a new Send connector.
B. Add a new external relay accepted domain for contoso.com and create a new Send connector.
C. Add a new authoritative domain for contoso.com and create a new email address policy.
D. Add a new internal relay accepted domain for contoso.com and create a new email address policy.
Answer: A
Explanation:
http://technet.microsoft.com/en-gb/library/bb124423(v=exchg.150).aspx
Step 1: Modify accepted domain for contoso.com and make it an internal relay domain.
Step 2: Create a new send connector which routes mail for the contoso.com namespace to the legacy namespace -if a recipient cannot be found in the Exchange org.
QUESTION 177
Hotspot Question
You have an Exchange Server 2013 organization that contains three servers.
The servers are configured as shown in the following table.
All inbound email messages from the Internet are routed through EX01.
You plan to remove EX01 from the organization.
You need to ensure that all of the functionalities of EX01 are transferred to EX02 and EX03.
The solution must minimize administrative effort.
Which functionality should you transfer to each server? (To answer, select the appropriate server for each functionality in the answer area.)
Answer:
QUESTION 178
Hotspot Question
You have an Exchange Server 2013 organization that contains a database availability group (DAG) named DAG1.
DAG1 contains two servers named EX01 and EX02.
On EX01, you have three networks.
The networks are configured as shown in the following table.
You need to ensure that DAGNetwork02 is the primary replication network and DAGNetwork03 is configured for iSCSI traffic only.
What two commands should you run? (To answer, select the appropriate options in the answer area.)
Answer:
QUESTION 179
Hotspot Question
You have an Exchange Server 2013 organization that contains an accepted domain named contoso.com.
A partner company has an Exchange Server 2013 organization named mvtraders.com. Nwtraders.com contains an SMTP server named mail.nwtraders.com.
Both organizatiosn only use certificates from the same trusted third-party certification authority (CA).
You need to ensure that all email messages received from the SMTP domain named nwtraders.com are protected by using mutual TLS.
What command should you run? (To answer, select the appropriate options in the answer area.)
Answer:
QUESTION 180
You have an Exchange Server 2013 organization that contains 5,000 mailboxes.
A user named User1 tests several Windows Phone devices.
You need to ensure that User1 can connect more than 20 Windows Phone devices to his mailbox,
Which cmdlet should you run?
A. Set-ThrottlingPolicy
B. Set-MobileMailboxPolicy
C. Set-ActiveSyncMailboxPolicy
D. Set-CasMailbox
Answer: A
Explanation:
Example 1:
Set-ThrottlingPolicy-EasmaxDevices 20
Example 2:
New-Throttlingpolicy “Increased ActiveSync Devices” -EasMaxDevices 20
Set-Mailbox steve-ThrottlingPolicy “Increased ActiveSync Devices”
Example 3:
Set-Throttlingpolicy “Increased ActiveSync Devices” -EasMaxDevices 20
http://technet.microsoft.com/en-gb/library/dd298094(v=exchg.150).aspx
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/Mobility/HowtoincreasethemaximumnumberofActiveSyncDevicesforaUser.html
http://thoughtsofanidlemind.com/2014/01/15/eas-device-partnerships/
http://www.slipstick.com/exchange/cmdlets/allow-more-activesync-devices/
QUESTION 181
You deploy an Exchange Server 2013 organization to a test network for evaluation.
You install the Mailbox server role and the Client Access server role on a server named ex01.contoso.com.
You do not perform any other configurations.
All of the ports from the Internet to ex01.contoso.com are open.
You successfully connect to ex01.contoso.com from the Internet and from the internal network.
You need to identify which types of Exchange Server clients will connect successfully to the organization without any further configurations.
What should you identify?
A. internal Outlook Web App connections
B. Android Phones using Activesync
C. Windows RT devices running the Mail app
D. Windows Phones that use Exchange ActiveSync
Answer: A
Explanation:
B
Not B
All Android Phones require the AllowNonProvisionableDevices parameter set to $True to sync successfully out of box with Exchange 2013 and this parameter is set to $false by default
C
Not C
All Windows RT devices running the mail App require the AllowNonProvisionableDevices parameter set to $True to sync successfully out of box with Exchange 2013 and this parameter is set to $false by default
D
Not D
All Windows Phones require the AllowNonProvisionableDevices parameter set to $True to sync successfully out of box with Exchange 2013 and this parameter is set to $false by default
The AllowNonProvisionableDevices parameter specifies whether all mobile phones can synchronize with the server running Exchange. When set to $true, the AllowNonProvisionableDevices parameter enables all mobile phones to synchronize with the Exchange server, regardless of whether the phone can enforce all the specific settings established in the Exchange ActiveSync policy. This also includes mobile phones managed by a separate device management system. When set to $false, this parameter blocks mobile phones that aren’t provisioned from synchronizing with the Exchange server. The default value is $false.
http://technet.microsoft.com/en-gb/library/bb123756(v=exchg.141).aspx
http://exchangeserverpro.com/activesync-policies-cause-test-activesyncconnectivity-to-fail/
QUESTION 182
You have an Exchange Server 2013 organization.
You create a public folder.
You assign an email address to the public folder.
You need to ensure that only a user named User1 can add content to the public folder by using email.
Which cmdlet should you run?
A. Set-MailPublkFolder
B. Set-PublicFolder
C. Set-Mailbox
D. Add-PublicFolderCMentPermission
Answer: A
Explanation:
Set-MailPublicFolder
This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service.
Use the Set-MailPublicFolder cmdlet to configure the mail-related settings of mail-enabled public folders. If you want to configure basic settings that aren’t mail related, use the Set-PublicFolder cmdlet.
EXAMPLE 1
Set-MailPublicFolder -Identity [email protected] -AcceptMessagesOnlyFrom “User1”
EXAMPLE 2
This example sets the primary SMTP address of the mail-enabled public folder [email protected] to [email protected].
Set-MailPublicFolder -Identity [email protected] -PrimarySmtpAddress [email protected]
http://technet.microsoft.com/en-us/library/aa997560(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/bb123707(v=exchg.150).aspx
http://technet.microsoft.com/en-gb/library/bb397214(v=exchg.150).aspx
QUESTION 183
You have an Exchange Server 2013 organization that contains 20 servers.
You plan to deploy Exchange Server 2013 RTM Cumulative Update 1 (CU1) to the first Exchange server in the organization.
You need to ensure that a user named ExehangeAdmin can deploy CU1 to the first server,
The solution must minimize the number of permissions assigned to ExehangeAdmin.
To which groups should you add ExehangeAdmin?
A. Schema Admins, Domain Admins, and Enterprise Admins
B. Schema Admins, Domain Admins, and Delegated Setup
C. Domain Admins and Organization Management
D. Enterprise Admins and Organization Management
Answer: A
Explanation:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-CABEAgAAQAAAAUEAAQAAAAg~
A: Both Schema Admins and Enterprise Admins membership is needed to update the schema and prepare AD
NOT B: Delegated Setup can be used to install the 2nd server, not the first.
NOT C: Both Schema Admins and Enterprise Admins membership is needed to update the schema and prepare AD. The user account installing the server is added to the Organization Management group during installation.
NOT D: Both Schema Admins and Enterprise Admins membership is needed to update the schema and prepare AD. The user account installing the server is added to the Organization Management group during installation.
QUESTION 184
You have an Exchange Server 2013 organization.
An Active Directory administrator is concerned about the permissions assigned to a group named Exchange Trusted Subsystem.
Exchange Trusted Subsystem has a member named Exchange Windows Permissions.
You need to show the Active Directory administrator all of the permissions assigned to Exchange Trusted Subsystem.
What should you use?
A. ADSI Edit
B. Active Directory Sites and Services
C. Dsget
D. Active Directory Users and Computers
Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/cc773354(v=WS.10).aspx
QUESTION 185
Drag and Drop Question
You have an Exchange Server 2013 organization.
You plan to delegate the following administrative tasks:
– View the status of the message queue.
– Create, mount, and dismount databases.
– Restore mailboxes from a recovery database,
– Modify the settings of Exchange ActiveSync devices.
You need to identify which role group must be used to delegate each administrative task.
The solution must ensure that the role group that has the fewest administrative privileges is used.
Which role groups should you identify? (To answer, drag the appropriate role groups to the correct tasks. Each role group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
QUESTION 186
Hotspot Question
Your network contains three Exchange Server 2013 servers that have the Client Access server role installed.
Each server is configured as a POP3 server and an IMAP4 server.
You deploy the Network Load Balancing (NLB) feature on the servers and configure NLB as shown in the exhibit (Click the Exhibit button.)
Use the drop-down menus to select the answer choice that completes each statement.
Answer:
QUESTION 187
Hotspot Question
You have an Exchange Server 2013 organization that contains three moderated distribution groups named DG1, DG2, and DG3. DG3 is a member of DG2.
You need to exclude from moderation the email messages sent from the members of DG3 to the members of DG1.
The solution must maintain moderation for the email messages sent from all other users.
What command should you run? (To answer, select the appropriate options in the answer area,)
Answer:
QUESTION 188
You have an Exchange Server organization.
The organization contains a server named EX01 that has Exchange Server 2010 installed and a server named EX02 that has Exchange Server 2013 installed.
Your mailbox is hosted on EX01.
You need to access the Exchange Adrnin Center (EAC).
Which URL should you use?
A. https://EX01/ecp?ExchClientVer= 14
B. https://EX02/ecp?ExchClientVer= 15
C. https://EX02/eac?ExchClientVer=15
D. https://EX01/ecp?ExchCfientVer=15
Answer: B
Explanation:
http://www.cgoosen.com/2013/07/how-to-access-exchange-admin-center-eac-in-exchange-2013-during-coexistence/
http://consulting.risualblogs.com/blog/2013/06/26/exchange-2013-coexistence-ecp-redirects-to-2010-ecp-2/
http://msexchangeguru.com/2013/01/16/eac-exchange-2013/
http://blogs.technet.com/b/meamcs/archive/2013/05/04/exchange-2013-coexistence-ecp-your-mailbox-can-t-be-accessed-using-the-address-you-entered-please-obtain-the-correct-address.aspx
QUESTION 189
You have an Exchange Server 2013 organization.
The organization contains four servers in the same Active Directory site.
The servers are configured as shown in the following table.
EXB and EX4 are members of a database availability group (DAG) named DAG1.
All users use Microsoft Outlook 2013 to connect to their mailbox.
You need to recommend a client access solution to ensure that all of the users can connect to their mailbox if EX1 or EX2 fails.
What should you recommend?
A. Add a layer 4 hardware load balancer that balances RPC traffic
B. Add a layer 7 hardware load balancer that balances the traffic on port 443.
C. Add a layer 7 hardware load balancer that balances RPC traffic.
D. Replicate all of the databases in DAG1 to both DAG1 members.
Answer: B
Explanation:
In Exchange 2013, RPC over TCP has been disabled. All outlook communications are now through RPC over HTTP (Outlook Anywhere). This unifies the CAS protocol methods and provides a stable and reliable connectivity network between clients and server and between CAS and Mailbox Server. It also reduces the number of namespaces required. It also eliminates end user interruptions. Hence moving mailboxes around in DAG and moving mailboxes between mailbox databases are now easy.
http://blog.loadbalancer.org/load-balancing-exchange-2013/
http://windowsitpro.com/blog/exchange-2013-dumps-cas-arrays
QUESTION 190
Your company has a main office and three branch offices.
The main office is located in Austin.
The branch offices are located in Denver, San Diego, and Chicago.
The network contains an Active Directory forest.
The forest contains a single domain.
Each office is configured as an Active Directory site.
The site in Austin contains four domain controllers that run Windows Server 2008 R2 and are configured as global catalog servers.
The sites in Denver, San Diego, and Chicago each contain a read-only domain controller (RODC) that runs Windows Server 2008 R2. No other domain controllers exist on the network.
You plan to deploy an Exchange Server 2013 organization.
Exchange Server 2013 servers will be deployed in the Austin, Denver, and San Diego sites. Users from the Chicago site will access their mailbox remotely.
You need to recommend changes to the Active Directory infrastructure to support the planned deployment of Exchange Server 2013.
What should you recommend?
A. Replace the RODCs in the Denver and San Diego sites with domain controllers that are configured as global catalog servers.
B. Configure the RODCs in the Denver and San Diego sites as read-only global catalog servers.
C. Configure Active Directory automatic site coverage for the Chicago site.
D. Upgrade all of the RODCs to Windows Server 2012.
Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/aa996719.aspx
There must be a writable copy of the global catalog at each site where an Exchange 2013 server is to be installed.
If you want to prepare for 70-341 exam in shortest time, with minimum effort but for most effective result, you can use GreatExam 70-341 practice test which simulates the actual testing environment and allows you to focus on various sections of 70-341 exam. Our candidates walk into the testing room as confident as a Certification Administrator. So you can pass the exam without any question.