Are you looking for a Microsoft 70-342 exam questions? Are you looking for Microsoft 70-342 exam sample questions to identify gaps in your knowledge that may hurt you on the exam? GreatExam is your best choice! We are committed on providing you with the latest and most accurate 70-342 exam preparation material.
QUESTION 91
The Internet link in the Tampa office will be unavailable during the weekend.
You need to ensure that all outbound email messages are sent from the Charlotte office during the planned outage.
What should you do?
A. Modify the cost of the Tampa SMTP Send connector.
B. Create a new mail exchanger (MX) record named SMTP2.fabrikam.com in the internal DNS zone.
C. Modify the smart host of the Tampa SMTP Send connector.
D. Modify the preference value of the fabrikam.com mail exchanger (MX) records.
Answer: C
Explanation:
Sometimes you need to route all your outbound emails trough a SMTP smart host and not route them directly to the internet.
From scenario:
* A Send connector named Tampa SMTP that uses SMTP1 as a smart host. The cost of the Tampa SMTP connector is 10.
* Mailbox servers in the Tampa office that provide outbound SMTP services to the Internet.
* An SMTP relay device named SMTP1 in the Tampa office.
QUESTION 92
Hotspot Question
You need to resolve the IRM template issue.
Which user right should you modify? To answer, select the appropriate user right in the answer area.
Answer:
Explanation:
I believe previous answer of Export is wrong. It appears this should be Extract.
IRM in Outlook Web App can’t prevent users from taking screen captures by using Print Screen functionality in the way Outlook and other Office applications do.
This impacts the EXTRACT right, which prevents message content from being copied, if specified in the AD RMS rights policy template.
http://technet.microsoft.com/en-us/library/dd876891(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/cc179103.aspx
QUESTION 93
You need to recommend a solution for the HR voice mail. The solution must meet the security requirements.
What should you recommend?
A. Create a UM mailbox policy and associate the policy to UM1.
Configure the voice mail protection settings of the UM mailbox policy.
Create an auto attendant and link the auto attendant to UM1.
B. Create a UM mailbox policy and associate the policy to a new dial plan.
Configure the voice mail protection settings of the UM mailbox policy.
Create an auto attendant and link the auto attendant to the new dial plan.
C. Create a UM mailbox policy and associate the policy to a new dial plan.
Configure the voice mail protection settings of the UM mailbox policy.
Assign the UM mailbox policy to the mailbox of the HR department.
D. Create a UM mailbox policy and associate the policy to UM1.
Configure the voice mail protection settings of the UM mailbox policy.
Assign the UM1 mailbox policy to the mailbox of the HR department.
Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/dd351041%28v=exchg.150%29.aspx
* Scenario:
/ Use Information Rights Management (IRM) to protect all of the voice mails left for the telephone number of the human resource (HR) department.
/ There is a UM dial plan named UM1.
* The Protected Voice Mail feature is available with Exchange 2010 and later versions of Unified Messaging (UM). It can be configured on a UM mailbox policy.
* By default, a single UM mailbox policy is created every time you create a UM dial plan.
The new UM mailbox policy is automatically associated with the UM dial plan, and part of the dial plan name is included in the display name of the UM mailbox policy.
You can edit this default UM mailbox policy.
You can create additional UM mailbox policies to apply a common set of settings for groups of users.
QUESTION 94
You need to recommend an Outlook protection rule solution to meet the technical requirements.
What should you recommend?
A. Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
B. Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
C. Create an Outlook protection rule and filter the rule based on the SentTo property.
Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
D. Create an Outlook protection rule and filter the rule based on the SentTo property.
Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
Answer: B
Explanation:
* Scenario:
Prevent the forwarding of email messages sent by users who have a value of Legal in their Department field.
* Use FromDepartment property and do not allow the user to override.
http://technet.microsoft.com/en-us/library/dd638178%28v=exchg.150%29.aspx
QUESTION 95
Hotspot Question
You plan to create two retention tags named Tag1 and Tag2. Tag1 will be used to move email messages to the Archive mailbox. Tag2 will be used to delete the email messages.
You need to identify which settings must be configured in the retention tags to meet the technical requirements.
How should you configure each retention tag? To answer, configure the appropriate options for each retention tag setting in the answer area.
Answer:
QUESTION 96
Hotspot Question
You need to ensure that the HR1 group can perform the tasks required to meet the technical requirements.
To which group should you add HR1? To answer, select the appropriate group in the answer area.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/dd351080%28v=exchg.150%29.aspx
QUESTION 97
You are evaluating the implementation of the planned static IP addresses for DAG1.
You need to identify the appropriate IP addresses for DAG1.
Which two IP addresses should you identify? (Each correct answer presents part of the solution. Choose two.)
A. 169.254.0.10
B. 192.168.1.10
C. 192.168.2.10
D. 192.168.10.10
E. 192.168.20.10
F. 224.0.0.10
Answer: BD
Explanation:
* Scenario:
/ Assign a static IP address to DAG1.
/ A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and EX6. DAG1 is configured to use DHCP to obtain an IP address.
/ Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are assigned as the MAPI network.
* A DAG network is a collection of one or more subnets used for either replication traffic or MAPI traffic.
Each DAG contains a maximum of one MAPI network and zero or more replication networks.
192.168.1.10 and 192.168.10.10 for MAPI connection subnet.
192.168.2.10 and 192.168.20.10 routeable too and suitable for replication traffic.
The question however doesn’t state that you need a seperate replication network.
Therefore, B & D
http://technet.microsoft.com/en-us/library/dd638104%28v=exchg.150%29.aspx
QUESTION 98
Drag and Drop Question
The security department implements a new firewall between the IP-PBX system and the servers in the Tampa office.
You discover that SIP sessions cannot be established between the IP-PBX and EX1.
You need to identify which ports must be opened between the IP-PBX and the Exchange Server 2013 servers.
Which ports should you identify? To answer, drag the appropriate port or ports to the correct group of servers in the answer area. Each port or ports may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
You can configure the TCP port that’s used to listen for Session Initiation Protocol (SIP) requests on a Unified Messaging (UM) IP gateway. By default, when you create a UM IP gateway, the TCP SIP listening port number is set to 5060.
The Microsoft Exchange Unified Messaging service and the UM worker process use multiple Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) service ports to communicate with IP gateways.
The Microsoft Exchange Unified Messaging service and the UM worker process use Session Initiation Protocol (SIP) over TCP.
By default, the Microsoft Exchange Unified Messaging service listens on both TCP port 5060 in Unsecured mode and TCP port 5061 when mutual Transport Layer Security (mutual TLS) is used.
Each UM worker process that’s created listens on port 5065 and 5067 (unsecured) and 5066 and 5068 (secured).
But when an IP gateway or IP PBX sends Realtime Transport Protocol (RTP) traffic to the Speech Engine service worker process, the IP gateway or IP PBX will use a valid UDP port that ranges from 1024 through 65535.
http://technet.microsoft.com/en-us/library/jj150516(v=exchg.150).aspx#ports
QUESTION 99
You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The Exchange Server organization has a mailbox size limit of 2 GB.
You need to provide engineers with the ability to retain certain email messages indefinitely.
The solution must meet the following requirements:
– Ensure that the engineers can access the retained email messages by using Outlook Web App.
– Ensure that the retained email messages do not apply to the mailbox size limit of the engineers.
– Minimize the storage requirements of the on-premises servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From Office 365, create Archive mailboxes.
B. Instruct the engineers to create a personal folder.
C. Create a retention policy.
D. From the on-premises Exchange Server 2013 organization, create Archive mailboxes.
E. Create a data loss prevention (DLP) policy.
Answer: AC
Explanation:
Option “A” appears to be the correct answer because it says:
“Minimize the Storage Requirements of the On-Premises Servers”
The correct answers should be A. & C.
A. From Office 365, create Archive Mailboxes
C. Create a Retention Policy.
If you select option D. as it was answered in the dump, then you are not meeting the requirements:
Minimize the Storage Requirements of the On-Premises Servers
C:
D:
In Exchange Server an archive mailbox is a second mailbox provisioned for a user that is separate to their primary user mailbox.
QUESTION 100
You have a database availability group (DAG).
The DAG is configured as shown in the following table.
You need to prevent a split-brain condition if a restore operation of the DAG occurs.
What should you do?
A. Deploy an alternate witness server to each site.
B. Modify the Datacenter Activation Coordination (DAC) mode.
C. Set the quorum model of the cluster to Node and Disk Majority.
D. Deploy another Mailbox server to Site2.
Answer: B
Explanation:
Datacenter Activation Coordination (DAC) mode is a property setting for a database availability group (DAG). DAC mode is disabled by default and should be enabled for all DAGs with two or more members that use continuous replication.
If a catastrophic failure occurs that affects the DAG (for example, a complete failure of one of the datacenters), DAC mode is used to control the startup database mount behavior of a DAG. When DAC mode isn’t enabled and a failure occurs that affects multiple servers in the DAG, and then when a majority of the DAG members are restored after the failure, the DAG will restart and attempt to mount databases. In a multi-datacenter configuration, this behavior could cause split brain syndrome, a condition that occurs when all networks fail, and DAG members can’t receive heartbeat signals from each other. Split brain syndrome can also occur when network connectivity is severed between datacenters. Split brain syndrome is prevented by always requiring a majority of the DAG members (and in the case of DAGs with an even number of members, the DAG’s witness server) to be available and interacting for the DAG to be operational. When a majority of the members are communicating, the DAG is said to have quorum.
QUESTION 101
Hotspot Question
Your network contains two Active Directory sites named Sitel and Site2. Both sites contain an equal number of users. Each site contains two Exchange Server 2013 Mailbox servers.
You need to recommend a high-availability solution that meets the following requirements:
– If a single Mailbox server fails, the active mailbox database copies on that server must fail over to a Mailbox server in the same site.
– If both Mailbox servers in the same site fail, the active mailbox databases copies must be switched over to the other site manually.
– If a WAN link fails, multiple copies of the same mailbox database must not be activated in both sites simultaneously.
How should you configure the database availability groups (DAGs)? (To answer, configure the appropriate options in the answer area.)
Answer:
QUESTION 102
Drag and Drop Question
Contoso, Ltd., is a bank that has offices in North America and Europe.
The company must comply with different regulations for North America and Europe.
The company uses Information Right Management (IRM) to protect sensitive documents, such as internal financial reports.
You need to recommend a compliance solution to meet the following requirements:
– Prevent users from disclosing customers’ personal information in email messages.
– Prevent users from disclosing internal financial data to people outside of the company.
– Prevent the permanent deletion of email messages of users who are under investigation.
– Allow compliance officers to search the mailbox of users who are under investigation without being able to alter the data in the mailbox.
Which technology should you recommend for each requirement? To answer, drag the appropriate technology to the correct requirement in the answer area. Each technology may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 103
Hotspot Question
You have an Exchange Server 2013 organization.
You need to create a single transport rule that prevents users in a group named Group1 from exchanging messages with users in a group named Group2.
Which two options should you use? To answer, select the two appropriate options in the answer area.
Answer:
Explanation:
I believe you should go for minimal administrative effort on this one. Meaning you have to choose for Sender and recipient to be members of…
The catch on this one is that the groups need to be mail-enabled groups, and the question doesn’t state anywhere these groups are. Bit of an educated guess…
QUESTION 104
Drag and Drop Question
You have an Exchange Server organization. The organization contains servers that have Exchange Server 2010 and Exchange Server 2013 installed.
A new compliance policy requires that all email messages remain stored for two years.
You create two retention tags named Tag1 and Tag2.
Tag1 moves the email messages to an Archive mailbox after one year. Tag2 permanently deletes the email messages after two years.
You need to meet the compliance policy requirements.
The solution must ensure that all email messages that are older than two years are removed as quickly as possible.
Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION 105
You have an Exchange Server 2013 organization. You need to ensure that a user named User1 can prevent the deletion of every email message that contains a specific word from all of the mailboxes. The solution must minimize the number of permissions assigned to User1. What should you do?
A. Add User1 to the Records Management management role group.
Instruct User1 to run the New-ManagedContentSettings cmdlet.
B. Add User1 to the Records Management management role group.
Instruct User1 to run the New-MailboxSearch cmdlet.
C. Add User1 to the Discovery Management management role group.
Instruct User1 to run the New-ManagedContentSettings cmdlet.
D. Add User1 to the Discovery Management management role group.
Instruct User1 to run the New-MailboxSearch cmdlet.
Answer: D
Explanation:
* If you want users to be able to use Microsoft Exchange Server 2013 In-Place eDiscovery, you must first authorize them by adding them to the Discovery Management role group. Members of the Discovery Management role group have Full Access mailbox permissions for the Discovery mailbox that’s created by Exchange Setup.
* The New-MailboxSearch cmdlet creates an In-Place eDiscovery search or an In-Place Hold. Unless specified, mailboxes on all Exchange 2013 servers in an organization are searched. You can stop, start, modify, or remove the search.
http://technet.microsoft.com/en-us/library/dd351080(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dd298064(v=exchg.
Our 70-342 dumps are rich in variety. We offer 70-342 PDF dumps, 70-342 practice test and 70-342 VCE dumps. We ensure you can pass the 70-342 easily. Welcome to GreatExam.com.